Taki7610
Unlock_GSM
Mã:
PMIC rev = PASS2(4)
HCLK = 96000000
[set_mmc_ocr] Sector Mode
[hsmmc_init] MMC card is detected
Product Name : VTU00M
CID:150100 56545530 304df16f 8577c79f
<display_card_info:1077> ext_csd
<display_card_info:1079>card_size: 15028
Total Card Size: 15029 MByte
Total Sector Count: 30777344
freq = 24MHz
MoviNand Initialization Complete!
Samsung S-Boot 4.0-20120315.121951 for GT-I9300 (Mar 15 2012 - 12:20:18)
EXYNOS4412(EVT 2.0) / 1023MB / Rev 11 / M0_TEST
pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: battery is not detected, do not init fuelgauge
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3a
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x1
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0xb
PMIC_IRQ1 = 0x67
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=c0c0c0c0
microusb_get_attached_device: STATUS1:0x3c, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw 'download_error.jpg'...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: 'download_error.jpg' j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
[ERROR:LCD] s6e8ax0_read_id : s6e8ax0_read() failed
PMIC rev = PASS2(4)
HCLK = 96000000
[set_mmc_ocr] Sector Mode
[hsmmc_init] MMC card is detected
Product Name : VTU00M
CID:150100 56545530 304df16f 8577c79f
<display_card_info:1077> ext_csd
<display_card_info:1079>card_size: 15028
Total Card Size: 15029 MByte
Total Sector Count: 30777344
freq = 24MHz
MoviNand Initialization Complete!
Samsung S-Boot 4.0-20120315.121951 for GT-I9300 (Mar 15 2012 - 12:20:18)
EXYNOS4412(EVT 2.0) / 1023MB / Rev 11 / M0_TEST
pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: battery is not detected, do not init fuelgauge
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3a
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x1
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0xb
PMIC_IRQ1 = 0xc3
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x1
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=c0c0c0c0
microusb_get_attached_device: STATUS1:0x3c, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw 'download_error.jpg'...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: 'download_error.jpg' j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
[ERROR:LCD] s6e8ax0_read_id : s6e8ax0_read() failed
--------------
<ID:0/025> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Set PIT file..
<ID:0/025> DO NOT TURN OFF TARGET!!
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> sboot.bin
<ID:0/025> NAND Write Start!!
<ID:0/025> param.bin
<ID:0/025> tz.img
<ID:0/025> sboot.bin
<ID:0/025> param.bin
<ID:0/025> tz.img
<ID:0/025> boot.img
<ID:0/025> recovery.img
<ID:0/025> system.img
<ID:0/025> modem.bin
<ID:0/025> Transmission Complete..
<ID:0/025> Now Writing.. Please wait about 2 minutes
<ID:0/025> Receive Response from boot-loader
<ID:0/025> cache.img
<ID:0/025> hidden.img
<ID:0/025> RQT_CLOSE !!
<ID:0/025> RES OK !!
<ID:0/025> Removed!!
<ID:0/025> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)