TP.HCM Samsung Galaxy S3 i9300 Unbrick Ok !

[Taki7610]

- Phone tình trạng mất boot - unbrick nạp rom lại ok !



======================================================
SDC Direct Access Connection Module
======================================================
======================================================

Card Reset Done!
Initializing Micro SD Card...
Card Initialized OK (V2.0 Compliant)
Waiting for IDLE State...
Card is now IDLE!

Reading Micro SD Card Information...
Manufacturer ID : 0x03
Application ID : SD
Product Name : SU16G
Product Revision : 8.0
Serial Number : 09C33EEC
Manufacture Date: July 2013

Card CID: 03534453553136478009C33EEC00D789
Card CSD: 400E00325B59000076B27F800A404013
Card SCR: 0235800100000000
Card OCR: 00C0FF8000

SD Card Size : 15931539456 Bytes
SD Block Size: 512 Bytes
Maximum Speed: 25000000 Hertz

SDHC / SDXC Card Detected...
Checking Lock Status...
Micro SD Card is NOT Password Protected!!!

Erasing SDC...
Samsung GT-I9300, I9500, N7100 UNBRICK Image
Start Writing to SDC at 0x00000000...
Number of Blocks: 0x0002B055

Process Done...

======================================================
1. Insert Micro SD Card to Phone
2. Make Sure Battery is Fully Charged
3. Connect UART Cable (150K Resistor)
4. Wait upto 5 Minutes...
5. Remove Battery and Remove Micro SD Card
6. Flash Phone with ODIN
======================================================
Total Elapsed Time 00:01:03