TP.HCM Samsung Galaxy S4 M919UVUEMK2 (4.3) UNLOCK OK !

[Taki7610]

- Root - Disable knox - Flash modem 4.2.2 - Unlock - Flash full ok !

<ID:0/426> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.15.4-jfltetmo.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/426> Odin v.3 engine (ID:426)..
<ID:0/426> File analysis..
<ID:0/426> SetupConnection..
<ID:0/426> Initialzation..
<ID:0/426> Get PIT for mapping..
<ID:0/426> Firmware update start..
<ID:0/426> SingleDownload.
<ID:0/426> recovery.img
<ID:0/426> NAND Write Start!!
<ID:0/426> RQT_CLOSE !!
<ID:0/426> RES OK !!
<ID:0/426> Removed!!

------Flash modem 422

<ID:0/426> Added!!
<ID:0/426> Odin v.3 engine (ID:426)..
<ID:0/426> File analysis..
<ID:0/426> SetupConnection..
<ID:0/426> Initialzation..
<ID:0/426> Get PIT for mapping..
<ID:0/426> Firmware update start..
<ID:0/426> modem.bin
<ID:0/426> NAND Write Start!!
<ID:0/426> Transmission Complete..
<ID:0/426> Now Writing.. Please wait about 2 minutes
<ID:0/426> Receive Response from boot-loader
<ID:0/426> NON-HLOS.bin
<ID:0/426> Transmission Complete..
<ID:0/426> Now Writing.. Please wait about 2 minutes
<ID:0/426> Receive Response from boot-loader
<ID:0/426> RQT_CLOSE !!
<ID:0/426> RES OK !!
<ID:0/426> Removed!!

---Unlock

Selected model: M919
Selected port: COM110 Z3X BOX Serial Port
Selected port speed: 115200
No answer from phone
Done with Samsung Tool v.16.9

Selected model: M919
Selected port: COM504 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Reading phone info...
Build: M9615A-CEFWTAZM-4.0.17062
Reading security... OK
Calculating... OK
Writing security... OK
Reseting...
Unlock done
Done with Samsung Tool v.16.9

--- Flash full

<ID:0/426> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUEMK2_M919TMBEMK2_M919UVUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/426> Odin v.3 engine (ID:426)..
<ID:0/426> File analysis..
<ID:0/426> SetupConnection..
<ID:0/426> Initialzation..
<ID:0/426> Get PIT for mapping..
<ID:0/426> Firmware update start..
<ID:0/426> SingleDownload.
<ID:0/426> sbl2.mbn
<ID:0/426> NAND Write Start!!
<ID:0/426> sbl3.mbn
<ID:0/426> rpm.mbn
<ID:0/426> aboot.mbn
<ID:0/426> tz.mbn
<ID:0/426> boot.img
<ID:0/426> recovery.img
<ID:0/426> system.img.ext4
<ID:0/426> modem.bin
<ID:0/426> NON-HLOS.bin
<ID:0/426> cache.img.ext4
<ID:0/426> hidden.img.ext4
<ID:0/426> RQT_CLOSE !!
<ID:0/426> RES OK !!