Taki7610
Unlock_GSM
Mã:
Welcome to Octoplus/Octopus Box Samsung software version 1.5.3
-----------------------------------------------------------------------------------
To connect SGH-T889 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Press Home button.
11. Go to dial window.
12. Enter "*#9090#" number.
13. Select "DM/UM over HS-USB".
14. Restart phone.
15. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM116
Selected model: SPH-W8400
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM116
Selected model: SPH-W8400
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM117
Selected model: SPH-W8400
Mode: Normal
Phone model: SPH-W8400
Firmware compiled date: Nov 27 2008
Firmware compiled time: 23:00:00
Firmware released date: Jul 08 2009
Firmware released time: 17:36:35
Incorrect IMEI
Bluetooth MAC: 00:12:47:01:23:45
SW version: M6260A-KYRZ-2.5.1036T
Creating NVM backup
Reading NVM done!
Unlocking phone...
Switching to emergency mode...
No diagnostic ports found!
Connecting to phone on COM117
Detected phone model: SPH-W8400
Mode: Emergency
Detecting firmware type
Searching for signatures...
Reading NAND...
Writing NAND
Phone is successfully unlocked